Recent content by moturbopar

Sorry all, been dealing with kidney stones! ouch!!!! Pushrods have sale pending. Thanks

I think the voodoo 250 would work well with street gears and the od. If you have more than 3.55s i think the voodoo 256 would be great.

hughes valve spring setup allows .520 lift on magnum heads without machining. My heads showed the could go .543 with these parts. like to sell as kit, all parts are new. Hughes 1110 springs, Hug1278 retainers hug1307b keepers hug3806 valve seals crane 36655-16 rocker arm conversion kit. $300...

Thank you!!!! Zero added, and yes that is the link.

New TCI rebuild kit 129000 for 62 up tf904, mopar, dodge, plymouth, chrysler. Also comes with 5.0 kick down lever, new metal piston , hardend pump gears. http://www.tciauto.com/tc/904-pro-su...t-1962-uphtml/ $150 firm

Howards hydraulic flat tappet cam. Lobes are designed to take advantage of mopar .904 lifter. Cam would be good for a blower or turbo. Will work well N/A also. Specs are 226 at .050 intake and exhaust. .520 lift with 1.5 ratio rockers. Ground on a 114 lobe seperation with a 110 ic. Cam will...

$110 each!

Converter is sold!

Hi, yes parts are still available, minus header and t4 flange.

Sorry been sick. its the 2800 to 3200 model. I will sell for $375 shipped, in the lower 48. That is for the tci rebuild kit. Road runner converter, hd pump gears. Piston, ,5.0 lever. Will seperate converter, and rebuild kit. Pm me.

just the cams.

New TCI rebuild kit 12900 for 62 up tf904, mopar, dodge, plymouth, chrysler. Also comes with 5.0 kick down lever, new metal piston , hardend pump gears. Low mile 10" roadrunner converter stalls around 3000 (tight) behind a healthy 360. Has antiballon plate and hardened snout. $350obo...

1 howards hydraulic flat tappet cam. Lobes are designed to take advantage of mopar .904 lifter. Cam would be good for a blower or turbo. Will work well N/A also. Specs are 226 at .050 intake and exhaust. .520 lift with 1.5 ratio rockers. Ground on a 114 lobe seperation with a 110 ic. Cam will...

Cam still for sale. $115!!! Will do $460 for the turbo, wastegate, v-band, line kit, fpr, hat and coupler.

I really like the lunati voodoo 262. works very well with manifolds, has a nice sounding musclecar idle, but not rough. Has shorter duration but has the similar lift as the xe274 so shouldnt have any valve train problems.