Recent content by roughidle

Looking for a 4bbl dual plane intake for a small block, truck pan and pickup. Would consider medium lift cam package if someone has one available. Building a mild 273 with a 318 top end to drop into a dakota. I'm located in Central PA. Thanks

Looking for a PAIR of 15" x 6" or 15" x 7" aluminum slot wheels 4-1/2" pattern. Will need shipping costs or pickup information within driving distance of Watsontown, PA. Will travel within reason for the right deal. I have a pair of 14" x 7" wheels to trade if it helps the seller. I'll keep...

What's the back spacing? Location? Price? Shipping?

Looking for a pair of BBP (or unilug including BBP) 15 x 6 or 15 x 7 aluminum slots. Please include a picture with your reply. Thanks

eBay is what we've been talking about. I've been able to find a blank center cap (which I'm fine with), but the center to center was incorrect. I need a ctc on the bolts to be 2-1/8". All I've found that are unbranded have been 2-1/4". There was an American Racing cap that was said to be...

Looks like they only offer a 2-1/4" center to center spacing blank cap. These are 2-1/8" center to center....

I'll look and see what they offer. Thanks

Does anyone have a pair of center caps for Mehelich Wheels? Picture of what I am looking for:

Let me know who has one for sale. Magnum M1 Dual Plane Thanks

The bearing came from the original column thread: Enter the ER16 flange bearing. It has a 1" inner diameter, and an outer diameter of 52mm. Turns out the column jacket has in inner diameter of ~52mm. Just a smidge less actually. So, you can search ER16, SER205-16, etc.

The drawing pdf is in the post above. I made an aluminum bushing.

Does anyone make a dog dish cap that will work with 3" wheel studs? I have steel wheels and 3" studs, but I'm curious if anyone makes a cap that will clear the studs. I'm assuming the stock caps will not clear but haven't a set to try. Anyone have any info on existing combinations that will...

These are not standard BB mopar heads - they are taller and physically different heads.

I have a 413 and 727 from a 1972 motorhome I'm tearing down and was curious if there was a market for the heads, manifolds, and other hard parts for these engines? I was planning on just tearing down and keeping the block, crank, rods and pistons and rat-hole-ing for a rainy day. Wanted to put...