Recent content by SB69GTS

Thanks ...thats what i needed

Does anyone have a pic of the inner fender splash shield that mound directly behind the front wheels of a 69 dodge dart. Trying to figure out what screws and washers that are needed. Thanks

I am putting dual exhaust on my 69 dart and the driver's side brake hose is getting in the way. I have got the tailpipe in but it's up against the brake hose and I mean tight. It is the 12-inch brake hose the goes onto the brass axle tee block that is in the way. Does anyone have a pic of there...

Hope you guys can help, put the door panels on for the 69 dart and the drivers door armrest will not attached with the screws ....does not have a threated insert. From what I can see, it is just a round hole and the screw goes right through. The door was from a 70 or 71. Can anyone chime in if...

What problems would i encounter switching from a 5.2 magnum to 5.6 magnum engine in a 96 dodge ram 1500. Do I need to swap wiring harness or ecu box. Any help would be appreciated

DP-80

I made a set that is higher than normal. The fronts bolt using existing holes and bolts from front bumper brackets and the rear bolt to rear spring bracket holes. Fronts have holes so I can bolt a long square tubing to lift front up and was able to slide engine, tranny and complete front...

Would be tight on one side ...so I stayed with a 245 to be safe

6 inch rims

I tried 215 70 15 on my 69 dart and they did catch the front of tje fender. ...the 205 60 15 worked great

Have the 245-60-15 on back and they fit great. The front is 205-60-15 on 15 x 6 rims and has a slight rake ....worked out exactly how I wanted to look.

Are the seat covers from legenday and how much for just the seat covers

Using iron x heads ... why are they only for alum. heads. I did not want to put anything in their that might damage or plug up the new stroker engine

Bought a 22" restored rad from a member here that was suppose to be brand new. Still have a hang tag showing mopar number and size. I installed it and filled it with fluids and sat for 3 days and was ok. Got engine all hooked up and started it and ran for 20 minutes. Next day I noticed a 1"...

Ok thanks alot guys ...wiring is finally done on the dart ...moving on to the door glass and carpeting and seats and she will be done. I did go exhange the 5-wire to a 4 wire relay and got her wired up. Did the following... 30 - Power from alternator ...Large stud 85 - Spiced to blue feed from...