Recent content by solarcabin1

  1. S

    Engine overheating

    This is my 2 cents worth. You have a good chance that the radiator has corrosion built up in it unless someone has cleaned it in the past. If it were my vehicle I would put a thermostat in it and get rid of the fan clutch and put a black injection molded fan on it . They cost about $50 plus...
  2. S

    [SOLD] New Tubular Upper control arms

    i would be interested in them if they dont sell Brian
  3. S

    [WANTED] pistons

    I am looking for a set of 340 pistons they are standard bore. 4.040 must be a set and either new or like new condition preferably with pins and clips Brian
  4. S

    Hole in tank fix?

    Don't assume the fumes are gone. If you desire to repair it use a vaccum cleaner but put the hose on the blowing end of vaccumm and stick the hose in the tank with all ports open. Make sure there is no old fuel in it and blow it out for about a hour. Smell the tank before putting a torch on it...
  5. S

    speedcooling.com

    the only reason people think aluminum cools better is that they are coming from a old plugged up copper and brass rad to a new aluminum rad. Thats been proven many times. their is no real cooling difference either way.Thats just my opinion and 34 yrs knowledge on working on and manufacturing rads
  6. S

    who do I make the money order out to Need full name and address Brian

    who do I make the money order out to Need full name and address Brian
  7. S

    [FOR SALE] 15 small bolt centers .....all nice!

    I have never had to pms anyone before how do I do that. My zip is 58772
  8. S

    [FOR SALE] 15 small bolt centers .....all nice!

    Do you have the 72's left and what is your method of payment. I have a U.S address zip is 58772
  9. S

    How to remove stainless rear window trim.

    yes i have a little patience goes a long way Some evening I could give you a hand Just have a few evenings booked right now Let me know if you need a hand Brian
  10. S

    Show Us Pictures of 2nd Generation Barracudas

    A cuda we built for my wife a couple of years ago Still have it Tried to delete this message but cant do that either but cant get photos to come up sorry
  11. S

    Edelbrock E-street E.F.I.

    We have fast systems on our 68 cuda 340 convertible and our 72 swinger 410 stroker Both work very well Looked at them all This seamed to be the best for us and price was very good Fun to drive
  12. S

    Tail pipes with relocation kit installed

    i just cut 3" off of the passenger side of the tank the run my exhaust along side of it. We have a 72 dart and a 68 cuda convert both done this way Sorry I should say this is done with stock A body tanks . I cant put other brand name parts on my cars
  13. S

    Radiator cap - should it be pressurized?

    every 1lb of rad cap pressure you get a 2 degree higher boile point. So a 16lb cap gives you 32 degree higher boiling point so in turn your boiling point would be 244 degree under a 16lb cap
  14. S

    [SOLD] 71 dart bucket seats with tracks

    we need bucket seats to fit 1970 plymouth duster we have cushions and skins but will look at whatever you got. Will these seats fit they also need to be high back Brian
Back
Top