Recent content by Sr4440

  1. Sr4440

    Seat Belt Cert Questions

    The manufacture is allowed to date 6 months in the future, so you get 2 years after sitting on the shelf at the speed shop. That being said, send a set to RCI in Jan 23, received them back in 7 days, dated jul 23. I will always send mine in to get recert, especially since I use a cam lock belts.
  2. Sr4440

    Valve keepers

    Looks like your intake keepers are -.050, oh and your notes are wrong, you do not have single groove keepers.
  3. Sr4440

    What octane should I run

    I have had guys show up at the dyno with 2 and 3 different fuels, and see what works best. The only caution I would add is, each fuel has a different specific gravity and that effects the A/F slightly.
  4. Sr4440

    MOROSO OIL ACCUMULATOR

    I have one in my roadster, it has a flat bottom pan and I lose oil pressure on a hard decell. Mine is a 2 quart, and it will hold about 20 PSI for around 15 seconds. It allows me to run 2 fewer quarts of oil in the pan. It also is great for pre-oiling the engine before startup.
  5. Sr4440

    best racing ign system.

    It was a Hei, it had an adjustable diaphragm, so we limited it to 4 degrees.
  6. Sr4440

    best racing ign system.

    LOL, I sent an email to them and got a response in 3 mins. 25 samples per second or once every 0.04 seconds
  7. Sr4440

    A first time for me...

    Question, on previous version of accutime, when getting a .0000 reaction time, the tree would just hold the yellow light, no red, no green. It was a dead giveaway of your reaction time.
  8. Sr4440

    505 BB Mopar on the dyno today

    FI rails with a carb?
  9. Sr4440

    440 break in noise from timing cover....we think....be gentle!

    Rotate the crank 180, the connecting rod bolts stick out the farthest. but that is a long ways away.
  10. Sr4440

    Check your belt dates guys

    I have 2 sets of cam lock belts, I send the old set in to get rewebed when the set in the car expires, they send them back with a BIG lead date. For example, sent in a set in January, returned 8 days later with a July 2025 date. Not a bad deal for $65.
  11. Sr4440

    Edelbrock setup for dual quad

    At idle, the "rods" are not used, all idle fuel is controlled by the idle mixture screws.
  12. Sr4440

    Hilborn 8 Stack help needed.

    Can you post a picture of your current bracket? Because everyone i know uses an enderle drive.
  13. Sr4440

    Edelbrock setup for dual quad

    Hello, my name is Joe, and I own/run an engine dyno. I have done dozens of duel 4 barrels. 1st, don't worry about the secondaries, they will never open, unless you get to 5500. 2nd, all Edelbrock carbs are rich out of the box. 3rd get a a/f gage if you want to dial it in right, it will be...
  14. Sr4440

    Fuel injection

    I guess it depends on your goals, if you plan on boosting it later, EFI. If you plan on switching between E85 and gas, EFI. About anything else, you can get a carb to equal or better than EFI. I switched my new engine over to EFI because I like to learn and let's face it, the last carburetor on...
  15. Sr4440

    best racing ign system.

    I know I am late to the party, but the issue with 2 barrel (500 cfm) circle track engines is above 4200 RPM they start pulling a manifold vacuum. On a 350 chevy, at, 6200 they are pulling 4in of vacuum, I am sure a 360 would be pulling more. So what this means is the timing used to come out of...
Back
Top