Recent content by stroker416

Pulled from a mismatch in a 69 Charger 44" spring perch centers Open carrier Not sure of ratio $400 Pickup near Scranton, Pa 18508

46" perch centers. Backing plates for 11" brakes Axles with new green bearings installed $600 pickup near Scranton, Pa 18508

Decided not to go to the garage today. Stayed home and worked on my own car. Didnt get as much done as I wanted this weekend. The mini-tub is done, minus being sealed and coated. Also started on fixing a rotted area in the sail panel area. Luckily I didnt have to get into the pocket for the...

Wondering if anyone out there has my old barracuda notchback. Was sold as a chassis in the Scranton area back in Sept. 2013. BH23F8B154132

More like what was he drinkin.

Might try Carlisle will be down around Hershey this weekend. I've been to Spring Carlisle before, lots of Mustangs, lots of Vettecams.

Thanks

Im thinking not to use these wheels o have laying around.

Ive got a 68 barracuda and im looking for opinions on front wheels and tires. Big bolt pattern, dr diff wilwood disc brake conversion, late a-body spindles. Ive got a set of 15x7 4" backspace wheels laying around. Anyone out there know if these would work with a set of 225/60r15 tires? Ive...

Ive been looking for an accelerator cable bracket for a Super Six conversion Im doing. Anyone ever see or use this: https://sportcompactwarehouse.com/big-end-performance-16031-throttle-cable-bracket?Year=1977&Make=Plymouth&Model=Volare Just wondering if it would work. I needs a Lokar cable...

@mosleyme very nice

This is the "water block" as I'm calling it for the 225. First time using SendCutSend's anodize feature. I'm happy with the result. Since I'm running a header, and there's a good possibility I'll be driving in temps below 50° F sometimes, I heard that I might freeze up the carb if I don't get...

New Melling 3-495S Timing Set 25$ + shipping From 18411 Cash, Venmo, Money Order

Set of SBI small block ir /6 valve springs. Count is 12. $30 + shipping From 18411

$499