Recent content by TomAce82

Yes, I read that in my manual too. Leads me to believe that the screw and retainer are removed. Thank you.

Nothing holding the piston in to the master when i Removed it from the booster. Is it supposed to have something in either of the threaded holes abound or below the mc piston?

Power brakes looks like this with an adjustable push rod that comes out of the booster. The question remains…are the tear drop and flat head screw removed prior to install against booster? I found one pic on partsgeek and one on classic industries.

Ok, I have a 65 barracuda with power drum brakes. I’m replacing a master cylinder that is leaking into the brake booster. When I pulled the master back off of the booster, I noticed the screw and tear shaped washer that are holding the “guts” into the mc (in my photo) was not there. Ive...

Got a set of complete 65 baracuda seats to rebuild from another FABO member. Thanks Daniel!

It's longer than the rear and has no ash tray. i think the base was chrome plated plastic orignially, and mine had a red pad (red interior)

PM Sent

what's the year on the defrost vents. 64/65? can you pm a photo if so? thanks

I'm looking for the drivers door armrest for my 64 valiant. It's a 2dr hardtop. and has red interior. If someone out there has one, i'm interested in the base and pad. :happy10: thanks

Hey RedFish, if this is the case (and i'm hoping it is), I should be able to remove the "inner and outer" seat track of a seat that has the sliding lever coming out on the right side of the seat, and reverse the track so that it comes out of the left side of the seat (like a drivers side seat)...

I need the Drivers side bucket seat sliding track for a 64 valiant. I do not need the seat mounts that mount to the floor (have those), but do need the sliding track hardware that mounts to the seat itself and then to the flor. The track ARM for adjusting should come out on the door side of...

Thanks to you both. I think that answers my questions. I'll know for sure in a few hours. I just bought a front split to reupholster and replace my worn buckets and rear seat. I will most likely put them up for sale once i throw the replacments from the 2 door post in my hardtop.

Is the rear seat the same in a 64 Valiant 2dr hardtop as the 2dr post?? Also, do bucket seats in that car mount into the floor differently than a split bench front seat? Thanks!

I have a passenger A body seat on the drivers and passenger seat of my 64 valiant. the foam and upholstery are indentical. Before reupholstering both, will i need to find a drivers seat, or can i remove what i have on the drivers side and reverse the tracks and sliding hardware to make it a...

On front bucket seats for a '64, is the track hardware for sliding the seat forward/back reversible driver to passenger side? My 64 valiant has a bucket seat on the drivers side that was pulled from what looks like the passenger side of another valiant with the same seats (different color)...