Recent content by Waco Demon

Thanks for all of the help found a test for the switch on line switch checked good so I went back to bulb got my meter they checked bad got two new bulbs all good now Thanks again

no

yes

That was my next thing to check I'm going to pull the column back out they where working before I pulled the column it was out for about 6 months

My 72 Demon brake light and left and right turn light also not working I had the steering column out checked all wiring all hooked up replaced all harness when I did overhaul thank you for any help

Thank you Harold

Thank you Harold

I have not received a good response on my problem is this not a good product thank you Harold

I have a custom aluminum tank that isn't what I'm looking for information I'd like to know how you got the fuel lines the Torsion bar frame where the factory fuel line went threw Harold Thank you

Has any one installed the Phantom 200 Stealth fuel system in there car Harold thank you

I took my old valve and used the copper seal from it the new valves are from China and seals are bronze and are hard and will not seal .The valve from In Line Tubes was a piece of crap I got one from some one hear on for a bodies only and rebuilt it I had a slit leak at the light switch the...

67 Dart 273 are you implying I could have cracking in this area drill another hole Harold

Yes all an fittings and 1/2" hose I understand how to clamp them along the frame rail I jest don't know to get around the frame at the torsion bar area

I'm looking at installing a Phantom 200 in tank pump I need to see how to install fuel lines from regulator to tank . Pic's would be nice thank you Harold

I need help getting my speedmeter cable installed to my gear venders pic's would be helpfull . CAR cable to adapter and to gear box thankS for the help Harold