Recent content by wildbill

No - standard later timing marks. Marked from 0-60 degrees BTDC and also has small marks every 90 degrees

It is LA based. The cam was a wiped lobe but is a Comp XE high lift 295 hydraulic flat tappet. This combo ran great in my full street 73 D100. 12.7s to 12.8s here at 2700 feet. It will need a new cam for sure. I also have two standard bore 360 blocks in the garage - I would throw one in for...

More photos

Located in Meridian, Idaho 83642 (near Boise) Local pickup only - just too heavy to deal with shipping this stuff 360 based 408 stroker short block. About 5000 miles on the rotating assembly. Block has about 10,000 total miles since machined. Scat 1-98113BI rotating assembly. Internally...

Full set of ARP 144-3602 head bolts. For small block with stock heads. Good condition. Located in Meridian, Idaho 83642 $60 shipped in USPS flat rate padded envelope

Stock 1973 440 harmonic balancer. Fits external balance 440 with cast crankshaft only. Good condition. Located in Meridian, Idaho 83642 $60 shipped in USPS flat rate box

Universal Summit 7.55 inch chromoly pushrods (0.050 longer than stock LA) 5/16 inch diameter with oiling holes. Set of 16. Like new condition. Located in Meridian, Idaho 83642 $60 shipped in USPS flat rate padded envelope

Two small block OEM LA timing covers. Gaskets cleaned off - ready to use. Located in Meridian, Idaho 83642 $60 each (your choice) shipped in USPS flat rate box

Small block Summit SFI approved harmonic balancer. Can be used for internal or LA external balance (removable weight included as pictured). Good condition Located in Meridian, Idaho 83642 $100 shipped in USPS flat rate box

Flowkooler 1700 water pump for later small block. Probably used less than 5000 miles. Cleaned up and ready to go. Includes water pump gasket your choice of Mr. Gasket 160 or 180 degree high flow thermostat. Located in Meridian, Idaho 83642 $100 shipped in USPS flat rate box

360 motor mount brackets and bolts for 1972 to 1993 Dodge trucks. Works to convert slant 6 (or big block) to a 360. Will not work on later V6 without additional brackets. Correct narrower bracket on driver's side for 360 - will not work for 318. Located in Meridian, Idaho 83642 $80...

Full Hughes small block 1.6 rocker arm setup. Includes Hughes hold downs and studs. Great shape. No problems with them at all. Probably under 15K total miles. Removed from my 408. No longer needed as I now have a big block. I will include a set of Summit 7.389 inch overall length (0.060 inch...

Sale pending

New Smith Brothers heavy duty 3/8 x 9.8 inch overall length cup and ball pushrods. Heat treated with 0.083 wall. Unused - I ordered the wrong length and these are not returnable. (too short for my big block with Trick Flow heads and solid flat tappet cam) I'm hopeful that somebody may be able...

Located in Meridian, Idaho (near Boise) 1989 Ford F250 extended cab 2WD. Fully drivable and runs great. Clear Idaho title in hand. Come and drive it home! Good condition. No rust or body damage. Paint is decent but not shiny. 460 engine with factory fuel injection. C6 automatic. 4.10 limited...