Recent content by yotah1

Well, considering that I live in Detroit, I'm using someone local rather than shipping parts to get powdercoated , but her work looks great nevertheless.

Hobby, but working on turning this into some sort of a business (mostly designing cars for other shops while I do my own builds). I outsourced the powdercoating these past few years as the Techshop where I used to PC my parts has closed :(

Next spring / summer, when the weather in Michigan allows.

4 link, triangulated, not 3 link. I didn't want to have to use a watts link or a panhard. SRT_DSTRHOLC, i have a high flow high pressure oil pump mod, lifter valley baffle, oil sump baffle too, and did the left to right cylinder bank oil tube mod as well when I built the block. In the end...

Inconel and titanium valves (0.1" bigger OD on both), Harland Sharp CNC roller rockers, ported and polished heads, currently a Thumpr cam but will update to Isky custom cam.

stock crank and rods, all blueprinted and balanced with KB hypereutectic domed pistons. Theoretically, it could rev to 8k and above but the torque and power curves don't really improve at higher RPMs so no real gain with lots of potential failures...

Walkaround of the entire build.

@Shane65 these are 5x4.5, 16x9" wheels with zero offset. So, in the latest news, the car is coming back home in a few days. We were at SEMA 2023 last week. It's been an absolute thrash over the last 4 months to finish the car for the show. Interior, exterior, paint, widebody, suspension design...

Me neither :BangHead::BangHead::lol:

Did a bit of work in the past few weeks : Motion Raceworks steering column with removable steering wheel hub and Momo steering wheel. Recaro tested in position to finalize some brackets. Laid out most of the sponsors stuff currently arrived with the exhaust tubing from Vibrant Performance and...

I also 3d printed my own header build kit and will build a full 4-2-1 stepped header system in 321 Stainless Steel for the car, equal length and everything. Not easy to package 22" long primaries and 15" secondaries in there.