School me on supercharging a 360
ok i didnt read all the previous hoopla,,
but i do know a little about street blowers,,and before i type a hole bunch of stuff,, ill say this last time ( few weeks ago) same topic,,went back and forth, at the end the person asking the same questions had this to say,,
' ILL HAVE TO SAVE MY PENNIES A WHILE, ITS LIKE 6 TO 8 GRAND TO DO THIS '
read it and read it again,,a average roots style blower motor for the street that is going to start,and run with out coaxing the throttle till the blower builds some heat in it to idle ,,because its costs to much to set the carbs up properly ...
now if you want a complete ready turn key blower motor for the streeet thats affordable go to BIG ALS TOY BOX web site,, he builds all makes,, he is not just a chevy guy,,and that what you are going to find at your local speed/machine shop.,
there are several stand alone items you will need that your not going to find used for a small block mopar,,at your local swap meet,, so gettign a complete set up,with carbs set up properly,,pullys that make every thing line up,, and an intake,, the price of an almost true blower intake alone will make you re think all this,,,
if you decide this is for you and your serious make sure you run a harmonic balancer,,an after market one not a 2 piece factory balancer,, it makes a difference when getting all the pullys worked out,,
i was lucky enough back in the mid 1990s to find my set up used pieces here and there that were all on this motor at one time,,,
i consider my engine almost bullit proof,,was built at an engine shop not a chevy shop,,,my block was re worked X block,, because the orignal owner of this block took it to a chevy speed shop,,and it was butchered, it was a new X block
i took it to a race shop that builds roundy round motors,,they know how to make a motor live,,, they build motors for people like kinser,,,
this motor is a mild street motor and in the mis 90s was 6 grand,including the used parts i was lucky enough to locate,,but didnt enclude blower carbs,,
if 600 HP is what your after easy with a blower,, but also easy with a 360 stroker,,and probably less money,,
if your seriuous ill tel you what ive been able to learn,,about building it properly,,by all meens if you call BDS,,, use your own judgement,,
