super stock springs

What is the best way to set up the front end alignment on the car. I ask this because the car will lean to one side when it is sitting and under power it will level out. I screwed up when i had my car aligned and didn't pay enough attention and they jacked up my one torsion bar to make up for the springs making the car lean. When I finally realized what they did I went and put them back where i like them and my alignment is off bad. So i though that I could just set the toe in but my left wheel is tipping in. So long story short do i set the car level when it is under power or do I set it when for just driving.
Thanks Kyle

well if you do the inboard spring perches, drill to vertical holes, one at 1.5" from the top and the next @ 2.5" from the top. put both springs on the top or bottom and it will level static, them just move the one spring opposite.