Aftermarket Wiring

Steve
I got the car running and I was so anxious to start driving around I did not wire up the wipers yet. I was undecided as to use the original switch or purchase a new one.
The reverse lights.
I took power from the fuse panel, and ran it through the neutral safety switch on the trans. So 12 volts goes into the switch on pin 1 then when it goes into reverse 12 volts out on pin 3 back to the reverse lights.
I bought the bright bulbs from Ron Francis they are really nice and bright. Also I ran a ground wire from the ground distribution block to the back for all the lights.
And I put dielectric grease on all the bulbs.

My car has no heater assembly

regards
George