904 shifting problems

Try checking the throttle downshift linkage. This was happening to me for a while until I got it adjusted right.

Pretty easy to do depending on what kind of linkage you have (1 peice or three piece).

Pop the clip off and pull the linkage all the way forward to remove all the slack. Spin the yoke until the back of the slot sits right against the throttle level. Pop the clip back on and test drive.

I get to go underneath this weekend and retighten all of the trans pan bolts.....not sure why they keep loosening up. I have set them to 95 in pounds, but I am under every 2-3 weeks retightening. Might try some thread locker on them this time.