[SOLD] Parting 1965 Barracuda

-
Status
Not open for further replies.
I need the plastic pieces that go across the rear window bottom and sides. Also, I am interested in the commando V8 emblems. Price shipped to 35216
 
Still have lots of parts left. I will be taking off what is still good and then junking the shell by the end of Sept.
 
I'd like pricing on the gage cluster, turn signal switch and cancelling cam (maybe column?), and both wiper arms and blades please.
Thanks!
 
Does this Barracuda have a front or rear sway bar ?
 
Do you still have this car?? I'm looking for a valance(front) if you have please let me know
 
Im taking off the parts that are still good and getting rid of the body by friday. Anyone have any last requests? I still have
273HP motor complete carb to oil pan stuck from sitting $200 or will part out motor
904 trans $25
floor shifter and cable $30
door glass $20 each
quarter glass non tinted $20 set
power steering pump $30
powersteering box $25
V-8 K frame $50
Auto floor shift column $50
bucket seat cores $20 each need recover
front and rear frame rails, torsion bar crossmember,radiator support
plus shipping on all parts. Lots of other small parts just ask.
 
If they're still available I'd be interested in the valve covers. Also, what condition are the tail light lenses in? Does the car still have the plastic cover for the trunk latch? What about the cardboard wiring cover across the back of the trunk? Does the car have a fan shroud?
 
still looking for front valance and wheel well trim for rear any HELP!!
 
The Front valance was smashed, and the wheel well trim is sold
 
68 bee said:
I have a complete 1965 Barracuda that I am parting out. The car has been off the road since 1980. The body is very rusty but the frame rails and radiator support look good. Looks to be all original. It has a 273 HP motor and automatic trans with 86000 miles. The motor last ran 2 years ago, but now it's locked up from sitting.

The car has power steering, power drum brakes, factory underdash AC, Bucket seats, automatic floor shifter. All the glass is there.

Let me know what you need, The car is in Long Island NY
Click to expand...

Hi, I have a 65 cudda original stock everything runs good but I need a floor shifter linkage and cable if you still have one, the auto floor shifters are hard to find. also if you have the fresh air vents/flaps I need both please get back to me if you have either of these thanks mcjustin20@yahoo.com
 
I need the vented valve cover cap that goes to the air cleaner if it's not dented or beat, so I can chrome it for my commando resto. Thanks, Frank
 
Status
Not open for further replies.
-

Back
Top