Windage tray question

I would find or buy 8 grade eight 1/2 washers. As I remember they were .100 thick. two under each 340 main bolt head. You can check by pulling one of the regular main bolts and compare length with the special windage tray 340 main bolts. I would only locktite the tray bolts. Imagine not having 2 x 85 ft lb clamping force on each of the two, out of five, main caps. Or using only 3 main caps... Not to mention low oil pressure due to oversize clearances on two main bearings. Good call 1wild&crazyguy.