here I go again

Ok,I'll give you a run down of all connections that I had made starting with voltage reg.Green wire to field at alt. no splices anywhere.Blue wire spliced to blue that goes from hot side of ballest to the other alt field.On to the ecm Light blue with yellow tracer to hot side of ballast(now there is a total of 3 wires going to the ballast hot at this time light Blue with yellow ,drk blue with white tracer which goes to brake warning lamp and dark blue to field at alt and volt reg.Black with yellow to coil neg.Comming from the load side of ballast there are two wires drk blue to coil pos the other is brown and goes to ignition switch .I'm going to try this place here in town to see if they can check my ecm and voltage reg as soon as I'm done here.I tried to post pics last night to show everyone that I'm not some kind of hack(can be very anal though)but I didn't have any luck.Thanks to all for your help,I will get it sooner or later.Mark