jeffromopar, Looking good so far. I would assume you will be using the lincoln in the background to put it back on. If so and you run it off of an extention cord you will be much happier with it's performance if you use a 10guage cord. Standard 12 or 14 guage cords allow too much of a voltage drop but the time it gets to the welder resulting in a much lower output. Also (must be the welder repair guy in me) The gun looks like it has quite a bend in it when it comes out of the welder. If, when you are using it you experience any feed problems, slip a new liner in the gun. There is a good chance that one has a kink in it.
