Easiest/Cheapest way to a 4bbl 318?

Check out the Hughes engines for they're Whiplash Camshaft....Ground on 109 degree...Made for low compression engine, raises cylinder pressure, and from what the video shows it has a nasty chop to it.....It was in a 340 but the guy had comp listed at 8.5....I talked to a rep and that's the cam I'm goin to put in my 318....

I looked on their website (www.hughesengines.com) and I only saw 1 camshaft for a 318/small block and that was the HUG HMC1326AL-9.

The specs:
Intake Valve Lift 1.5 .485"
Exhaust Valve Lift 1.5 .518"

Intake Valve Lift 1.6 .517"
Exhaust Valve Lift 1.6 .552"

Intake Duration at .050" 213°
Exhaust Duration at .050" 226°

Lobe Separation Angle 109º
Sweet Spot RPM 2000-5300

Maybe I'm wrong here, but that seems extreme for the mild 318 build that I'm going for. Am I wrong here?