Narrowed Dana 60, ladder bar setup, Monocoque wheels
I have for sale a narrowed Dana 60 rear complete with 4.56 Richmond gears, Strange 35 spline axles and spool, ladder bar setup and panhard bar, Aerospace Components disk brake setup and an extra caliper with new pads in the calipers. The ladder bars are adjustable lower bar measuring approximately 32 from the center to center of the heim joints. The axles are drilled and taped for both the 4 ½ and 4 ¾ bolt patterns. Its currently set up with the 4 ½ pattern. The housing measures 35 5/8 flange to flange, 40 ¼ from axle face to axle face, 42 ¼ from wheel face to wheel face. Even thought its not in the picture, there is also an aluminum cover that has the support bolts to add support to the main caps of the differential. In addition to the rear, I have a pair of Monocoque lightweight aluminum wheels that are 13 ½ wide and have a 1 ½ backspacing and the 4 ½ bolt pattern. With these deep wheels, the total track width at the middle of the rim would be 54 ½. I dont have any tires to go with this setup but the inside distance between the rims measures 39 ¾ and the outer distance of the rims measures 69. In addition, there is a 1 spacer between the brake rotor and the wheel face so if you take them out, the dimensions will be made narrower by 2 inches. Id like to get $1500 for everything plus the shipping if necessary.
Ken
Edison, NJ