Looking for pics...

-
M

moper

Well-Known Member
Joined
Dec 27, 2004
Messages
15,899
Reaction score
2,490
Location
eastern CT
Can anyone post decent pics of a '67 to '69 Barracuda tail panel area? I'm looking for the spots where the tail lamp housings meet the 1/4 panels. A clear pic of both sides, taken from the rear would be a Godsend... Thanks Guys!
 
pics

d9.JPG


bar5.JPG
 
Thank you very much SG! That's exactly what I was looking for....And you just caused me to see a bunch more work I need to do...lol.
 
well, it's a customer's car. the skins were installed by them. (thier first attempt) So aside from some oil canning and "fixing" here and there..I thought things were amiss when I saw the way the lights fit. So I saw your pictures, and then went and measured a friends car. This one was 1/4" wider on the passengert side than supposed to, and the 1/4 skin didnt fit right, so it was too tall, and not long enough on the driver's side. I have pics, but I have no clue how to shrink them down to fit this site. Can someone tell me how to shrink pics with Windows?
 
Also, the tal lights on my 69 never fit right. That car had original 1/4s on it.
 
Well, I cant hit photobucket from here (work). I fixed them yesterday. But it took about 6 hours to get them both looking the way they are supposed to. Not perfect, but like yours Adam, not many I've seen are. I think i got them small enough now...Had to change the picture editing program...lol. So here goes.
First, RH the way I got it.
second, RH in process of fixing.
third, RH fixed. (Still needs a little filler to smooth it out, and the "Step" on top is apparent in about 40% of factory cars I've seen. I may be able to get that better. We'll see)
fourth, LH as I got it. You cant see the 1/4" gap at the bottom tho...
fifth, LH fixed. Again, needing a litle mud, but at least in the ballpark.

100_0101.jpg


100_0102.jpg


100_0103.jpg


100_0105.jpg


100_0107.jpg
 
You must log in or register to reply here.
-

Back
Top