Take a guess where the bottle neck is!

green1 said
Where is the lokar hanging? Idle, I can see that, due to bracket. Top end????

Yeah at idle. I haven't checked it in a while, I "used" to be OK at WOT, but it probably has shifted.

moper said
Ok. But the springs are the wear item. As for the cam, if preload wasn't checked when you assembled it, check it. That's what I was referring to.

How do you set pre-load? With shims under the springs? It is a pretty mild hydraulic flat tappet cam, those are relatively maintenance free aren't they (that's why I chose it)?