OK I need help again guys and gals.
just keep looking,, they are out there,,,any auto swap meets in your area??? go to all of them,,,look on craigs list, e bay, either get your self or make a pattern that you can carry to the swap meet,,,take a rim off of your car,or use the spare if you have one,, cut the card board round,so it sits flat on the back of the rim,,,tape it down,,then from the front take a sharpie and drawl the lug holes on the card board thru the front of the wheel,,,then cut the holes out that you just drew,,,
that way if you go to look at rims,,there will be no mistaken that you are looking at the correct bolt pattern,,people will sell you what you need,,not what they have,, and dont go with to wide of a rear rim,6 inches will be perfect,,,7 may work depending on the off set,, or you will need air shocks or bigger leaf springs to clear that shallow rear wheel well,,
if your looking at old used rims,,aluminum as long as it is not chipped or borken,,can alwasy be polished back to a nice appearence,,
