15x10 on Duster

You might be better off having the rear end narrowed to avoid the problem. You would have a much better wheel selection too. Most shops can do it for 100-200 bucks. You can more than likely cut enough off the axles with a high speed cutter (if the splines are long enough) and not have to buy shorter ones. I narrowed mine so that the outer flange is right against the "U" bolts. I nm running 15x10's with a 5.5 offset. If you already have the wheels you can put them on and see how much you need to move it in. Then just have that much removed on each side.