360 not starting "Now"

Ok gang, work your magic. Got a 72 Ply Val that we swapped the 318 for a 360. Been a on going project for about 6 years. I am a big block guy, but have been working on this for a family member. Had a few leaks and what not on the first start up, but nothing that stopped the brake in process. Felt good about the motor and started putting on the TTi's. Got them on and the 3" system. Time to hear what she sound like. Car will not start. The electrical system is a mess. Burnt bulkhead connector. But have delt with this before. We are going to rewire it. I have a spark, but its a orange spark Not a nice hard blue spark. It has been converted to electronic (Mopar Kit) First question is. Why is there a Condenser on the coil. Have not seen this one before. Took it off and the spark went away. put it back on, and the week spark comes back. Next, Is it possible to run one of the ECU wires direct to 12v power to run this thing and see where the problem might be. Or bypass the ballast resister to start it. It will not even turn over by the key, I have to put a remote button on the starter relay to turn it over. Thanks for the help. Feels good to get back in the shop.