My 1974 Plymouth Duster 360
Thursday was just pure bliss.
I was uphoric all day. I couldnt believe my accomplishment.
I uploaded my crankup vid to youtube and had to share:
[ame="http://www.youtube.com/watch?v=0x0Fc_R5us0"]YouTube - kpgsx 1974 Plymouth Duster 360 roller cam LA360 crankup[/ame]
Above.
I prepped the brake system for bleeding. Topped off the reserviour. Loosened all the bleeders.
Tightened up the Driveshaft Strap Bolts.
Swept the garage floor.
Friday the wife and my middle child felt like crap. No fine tuning.
Complained of gasoline vapors all day. So I made up a vent hose for the fuel tank, and covered the carb.
Console Pivot shaft bracket showed up Friday afternoon.
I installed that this morning.
Adjusted the Shift Linkage for 1st thru Park.
Cranked it up and let it warm up.
Put it in Nuetral and started throwing the Mercron to it till it showed up on the stick.
Shut it off and let it cool.
Attempted to bleed the brakes but the rear brake cylinders are not passing fluid thru them.
Front Circuit bled with no issue.
Ahh Hot Rodding....:bootysha:
Its 2:00am and I am tired....going to bed now.
Thursday was just pure bliss.
I was uphoric all day. I couldnt believe my accomplishment.
I uploaded my crankup vid to youtube and had to share:
[ame="http://www.youtube.com/watch?v=0x0Fc_R5us0"]YouTube - kpgsx 1974 Plymouth Duster 360 roller cam LA360 crankup[/ame]
Above.
I prepped the brake system for bleeding. Topped off the reserviour. Loosened all the bleeders.
Tightened up the Driveshaft Strap Bolts.
Swept the garage floor.
Friday the wife and my middle child felt like crap. No fine tuning.
Complained of gasoline vapors all day. So I made up a vent hose for the fuel tank, and covered the carb.
Console Pivot shaft bracket showed up Friday afternoon.
I installed that this morning.
Adjusted the Shift Linkage for 1st thru Park.
Cranked it up and let it warm up.
Put it in Nuetral and started throwing the Mercron to it till it showed up on the stick.
Shut it off and let it cool.
Attempted to bleed the brakes but the rear brake cylinders are not passing fluid thru them.
Front Circuit bled with no issue.
Ahh Hot Rodding....:bootysha:
Its 2:00am and I am tired....going to bed now.
