67 Dart Build Triangulated 4 link & Mini Tub

Recap of the clearances......

I have massaged the inner tub with an equilizer tool since these photos. You can see that it is pretty tight on the radius. If I would have put the rear end any further back there would have had to be extensive rework of the rear tub area for sure.

At the TOP of the tire right at the inner fender well there is the exact same side to side clearance as you see in the OUTER wheel well lip... It was alot of measuring and making sure before the B Body axle was cut 3 3/4 of an inch on each side. My first calculations were 1" Less and I almost went with it. Buttt I decided to put everything back on and recheck my measurements for the 10th time to make sure. I am glad that I did.


View attachment IMG_1269.jpg

View attachment IMG_1272.jpg

View attachment IMG_1273.jpg