Need help with windshield and rear window install on 67 barracuda

I'm not quite following . Part number mean nothing to some of us.
I can tell you what I know and hope it helps. 1967 front and rear gaskets used a simulated chrome lock strip. That material has an odd profile. D or F shaped.

1968 and later gaskets were of 2 different kind. Either a self lockings one piece gasket or a gasket that also required a lock cord. That lock cord is a O profile black cord.

Now... There will be corners where water ponds on painted steel whether its hidden under stainless reveal moldings or not.
These Ponds are a little larger on 67 than later. This is noticed when you install used stainless on a 67 and bump it tight to the body. You will see marks where the stainless pieces overlapped in its previous life/application. In other words, the 67 glass bed is just a tad larger. The body work lines aren't as straight on 67 either. The stainless moldings will show this also.
The great thing about the 67 type gaskets is forgiveness. They don't emphasize imperfections like the stainless does.

There are corners where water ponds on glass and rubber that are never hidden.
The