Oil pans

66dartman said
A stock center sump pan will work, I used a Milodon p/n 30755 in my 66. Charlie's=$$ so whatever you want to spend.

Did you have to do any clearance work on the K-frame at all?

Keith Mopar said
I've used a stock 340 pan, and a 360 pan on my 65 Cuda and neither of those had any problems. I have included some dimensions. Hope it shows up ok

Those dimensions are great! Thanks! :thumbup:

I had an old moroso pan on an engine I bought. It was really low, and leaked at the sump weld. The roads hear are really bad in some spots, so ground clearance is pretty important. I'll look into the Milodon setup.