72 Pro Street Dart
i did some mock up on the motor today before sending it to the machine shop to see how all the ports match with the intake and how close the headers are to the block to see if i need to debur something and so far so good taking in consideration the thicknes of the COMETIC head gaskets and intake gaskets with more or less .005 off the block deck when done and is just going to be a mater of match port the top of the head ports at least 1.5mm and the bottom of the intake manifold floor about less than 1mm plus the cleanup i am going to do on the ports intake and exhaust on the head, i am in the proces of fab a throtle body addapter with a low profile setup to install the Q45 90mm TB i got and i got already the fuel rail for both sides on -10 for the injectors, so this is going to be a pump gas monster, so "buy a hybrid guys i need your gas"
Here couple of pics.
i did some mock up on the motor today before sending it to the machine shop to see how all the ports match with the intake and how close the headers are to the block to see if i need to debur something and so far so good taking in consideration the thicknes of the COMETIC head gaskets and intake gaskets with more or less .005 off the block deck when done and is just going to be a mater of match port the top of the head ports at least 1.5mm and the bottom of the intake manifold floor about less than 1mm plus the cleanup i am going to do on the ports intake and exhaust on the head, i am in the proces of fab a throtle body addapter with a low profile setup to install the Q45 90mm TB i got and i got already the fuel rail for both sides on -10 for the injectors, so this is going to be a pump gas monster, so "buy a hybrid guys i need your gas"
Here couple of pics.
