MD,
YES!!!
I already cut the axle and attached all of the tabs for the four link. not only did I measure I mocked up with the wheels and rims. I dont know what happened.
I spent the last few days chopping out the outer portion of the inner wheel well. I cut the fender lip down from 1.5" to .5" and ran the sheet metal to the body panels. after welding and seam sealer and truck bed liner it looks pretty good and I now have 1" of clearance at the fenders.
Later down the line I will get a pair of 18" wheels with a 2.5" offset and a set of 335 tires. Right now I have 315s.
Andrew