95 Cherokee rear discs (pics)
F body 8 1/4 mounted in my 72 Dart - Drivers side -
And an on the back picture up into the well -
Cut off the super hole spring mounts and welded on a new set of standard Mopar Performance seats at 3/4 of an inch inward. Bolted right up. I used an 8 1/4 3.23 (one legger) geared rear out of a Petty Edition 78 Aspen (Jim in AZ hooked me up on this one! $100 for the rear, including 5 BBP 14s with Roller tires.).
It left about 2 to 2.5 inches of clearance to the wheel well lip, and a pretty healthy amount of room (2.5 to 3 inches) between tire and spring. I stuck 205/70/14s on my stock BBP steelies.
Going to have Wheel Vintiques or Stockton Wheel build me a set of 15s that are 8 or 9 inches wide with offset to fill the well in the next 2 years. Wife already had a cow with the BFG TA skins I got.
F body 8 1/4 mounted in my 72 Dart - Drivers side -
And an on the back picture up into the well -
Cut off the super hole spring mounts and welded on a new set of standard Mopar Performance seats at 3/4 of an inch inward. Bolted right up. I used an 8 1/4 3.23 (one legger) geared rear out of a Petty Edition 78 Aspen (Jim in AZ hooked me up on this one! $100 for the rear, including 5 BBP 14s with Roller tires.).
It left about 2 to 2.5 inches of clearance to the wheel well lip, and a pretty healthy amount of room (2.5 to 3 inches) between tire and spring. I stuck 205/70/14s on my stock BBP steelies.
Going to have Wheel Vintiques or Stockton Wheel build me a set of 15s that are 8 or 9 inches wide with offset to fill the well in the next 2 years. Wife already had a cow with the BFG TA skins I got.
