no fire

If this has a 4 pole ballast resister, try another ballast resister. I have seen these go bad on a start up. If that does not work go with a new ECU, ect.. these are a simple system. If you have 12 volt power on the start mode on the out going side of the resister to the coil and 12 volts on the power inlet to the resister from the key when its on run, which is the ignition side the power side is ok. That narrows it down to a bad ECU, coil or bad pick-up in the distributor. I would replace one at a time with new. To me it sounds like a bad ECU.