A-bodies.......Big motors

Hemi Mark was in the area Sat so he stopped by to bulls&%t for a while..I showed him my latest generation K-frame pieces.I'm going to make six or so(now laser cut/better quality/more precise/and cheaper) and I told him I would give him one to replace the original one I built him since all the componets (rack, coilovers, ect will bolt right on ) then I'll sell a few. As Mark,Jim(Hemi Demon), and I can tell you..the K-frame is cheap...it's the rest of the pieces is where $$$$ adds up...I can now sell the basic K-frame for $495.00......my advise to anyone on a budget...keep the stock k-frame/torsion bar/steering box..but if you are racing(I'll be making a several of the aluminium version) or installing a Hemi were you don't have a choice because of room and especially if you want all of it to fit under a flat hood (thats why I don't make a power steering model) then spending the money makes sense. To use my K-frame requires tubular lower/upper control arms,/modified mustangII spindles/motor mounts of choice/shock tower brace/off the shelf coilover shocks/71-72 pinto rack,mount,balljoints,ect..another $2000-2500.depending on application........anyone interested ...e-mail me [email protected]