400 builds-anybody?? NON STROKER!
Bore: 4.28"
Stroke: 3.38"
Rod length: 6.765"
Dome: 12.5cc
Compression height: 1.493"
With 440 length H-beam rods, I reduced the rotating assembly by over 1 pound, compared to the stock pistons and rods. Probably would of saved a little more if I used I-beam rods.
Also went with the 1/16", 1/16", 3/16" rings.
The pistons are coated with a dry film lubricant on skirts and a ceramic coating on the piston top.
Bore: 4.28"
Stroke: 3.38"
Rod length: 6.765"
Dome: 12.5cc
Compression height: 1.493"
With 440 length H-beam rods, I reduced the rotating assembly by over 1 pound, compared to the stock pistons and rods. Probably would of saved a little more if I used I-beam rods.
Also went with the 1/16", 1/16", 3/16" rings.
The pistons are coated with a dry film lubricant on skirts and a ceramic coating on the piston top.
