Denso Alternator Installation

I run the Denso alternator, to handle the electrical load. I have twin inline FI fuel pumps, electric fan and water pump, nitrous bottle heater, MSD ignition, and the nitrous system itself. I use a full throttle micro switch to disable the field circuit, when making a pass at the track, so the battery has to do all the work, during a run. Then with the engine off, in the pits, I have to run the fan and water pump to cool down, and the bottle heater, to restore the nitrous pressure. Then there are head and tail lights for nite racing. I need the alternator to be able to recover the battery while driving to the staging lanes, and back to the pits after the run.

MD318: you can run the denso alternator, as long as the brackets are correct for it. If you don't have the correct brackets on the engine, now, I think the one from a 88-89 360 truck should work. Make sure you increase the size of the "hot" wire, to handle the increased current available.
Any parts store can supply this alternator (rebuilds of questionable quality), but the best place is the salvage yard. You can get the alternator and the correct brackets at the same time.