How much HP for my 360 build in my '67 Cuda

Tony Fields said

Bores +.060
Eddy Performer RPM Alum. heads 2.02 x 1.60
Eddy Air Gap intake dual plane
Eddy 650 Carb
Comp Cam XE284 hyd.
Comp. Ratio approx. 8.5:1
Balanced rotating assembly
Stock 1972 360 cast iron exhaust manifolds
Probably a 2-1/2" Flowmaster exhaust system


For those of you that have gone thru this, about how
much power and torque should I expect at the wheels?

Thank You for your input

Click to expand...

My calcs say you have ±9.5CR with flat top in the hole .080 pistons, .024 gasket and 63cc Eddys.
As said the XE268H would be a good cam
Camshaft Part # 12-242-2 Designation XE268H-10
Duration @ 0.006" 268 / 280 Duration @ 0.050" 224 / 230
Max Lift w/ 1.5RR 477 / .480 Lobe Separation 110
Lobe ID#'s 5443 / 5203 Intake Centerline 106

or my rec would be to step up a bit to the XE 275HL part # 20-227-4 which will still work good with your convertor - and the sound will be there too.