Oil Pan Help small blocks

Thanks all. Well I will take a look at milodon too. I read that it was either the milodon or moroso that had to have the kframe notched. And if I went with one of the 8 quart pans you do not need a windage tray? At least that is what I was told by others.

I know that the stk mopar windage tray has to be bent up etc to clear the stroker crank.

On the reply about a stk pan, yep I know they are 4 qt + 1 with the filter, but it list the performance pan as 5 qt. Is it still 4 qt + 1 with filter. If I go with a skt type pan maybe even the one above from Kevco I most likely would need a windage tray, but on some pans they keep the crank out of the oil and then this is a non issue.

Well yes I will take the numbers of the milodon pan and misc parts.

I just do not want to run only 5 qts. I have even thought about a remote filter adapter, run dual filters and an oil cooler. This would add at least 2.5 qts to the system. Then I could use the windage tray to help the crank out somewhat in the oil. But it does seem that a stroker crank is going to be into the oil even more than the stoker. So something needs to be done. :salute: