62 valiant /6 turbo build

Shaker223 said

That cam will work just fine. If you cannot find the aftermarket rockers you are looking for....it will end up being appx. .442" intake and .480 exhaust with the stockers. The stockers work just fine. I found an NOS set on the ebay for $65. I also bought a new shaft to go along with the arms. The only thing I did was shim the rockers to prevent some of the excessive side to side movement.

Click to expand...

Tom,

I still haven't checked this set of rockers, but will do so this week.

I have run up a lot of blind alleys, looking for 1.6 rockers. Now, I only need them on the intakes; I think with the excessive duration I ended up with (231) on the exhaust, the weak-kneed, stock rockers will knock that back to an acceptable level, so the Intakes are still a bit lacking, I think.

Maybe I'll get lucky and find half a set (6) on ebay, or here...

Thanks for the advice!!!8)