Aftermarket Auto Shifters - What are U running ?

Snake,
Thanks for checking on that for me.

I"m not using the factory holes because the seats I'm using arent even close to being where the factory holes would be.

I'm just having a small issue with where exactly to mount the drivers seat, mainly because the tracks on these seats are farther apart.

I've already cut the "humps" or raised sections out of the floor where the bench seat used to mount, and welded in flat metal in its place so I have a larger flat area to work with.
Its just on the drivers side, with the seat lined up with the steering wheel, the inside track is pretty close to the tunnel, but the mount is on the flat. It will just be a little more tricky to make the re-enforcing plates that I'm welding to the floor. The one will be partly flat and will go up the side of the tunnel a little.
Or I could mount the seat a little more towards the door, the steering wheel would be slightly offset but my inner track would be more on the flat, and my re-enforcing plate would be flat too.

Thanks for the input on that though, I'll post pics of the whole thing when its finished.
Heres a pic of one of the seats. They are from a 2005 Scion TC, quite comforable and good support.