horsepower tv;#2 360 build.

So most of you saw the episode where they built a stock 360. My kid coulda dun a better job.

This time they bought a used high perf 360 someone had built up the right way with a roller cam,eddie heads,aftermarket pistons and a roller cam. It had been sitting in damp storage,but when they opened it up all they replaced were the cam bearings.

Result;

Over 430 h.p and 468 ft/lbs of tq!!! The young buck on the show was visibly very impressed and commented on the amazingly flat and steep tq curve. He had never seen anything like it.That motor zinged thru it's rpm range,was a real revver.

Welcome to MOPOWER h.p t.v!!

That's what a real mopar engine can do when the real issues are correctly addressed by a non chevy mopar luvin guy.

I wish I could find a 360 with eddy heads for $475! I sure am glad they showed you can build a small block mopar reasonably that will make power. At least it wasn't another SBC or SBF. That kid on there is a bowtie fan, so it was nice to hear some positive comments about a mopar from him.

There's been some discussion about it.

http://www.forabodiesonly.com/mopar/showthread.php?t=127584