Cuda 1/4 mile times?? here it is!

Yes, it will lean out; if the air speed or velocity can't maximize the booster flow then it will lean out, typical symptoms of a carb that's way too big.

Put 100 jets in it and it'll still be lean.

Yes we have set up fuel systems on the 400+ inch strokers, lot's of them. Fuel requirements are determined by RPM, CID and combustion chamber efficiency.

I can't guaranty you that a 750 Mighty is the perfect carb for you but I will guaranty the 1000 CFM is wrong and your fuel delivery system will never keep up to your motor.

Go to my web site and complete the spec sheet and email it to me and I'll size the carb and fuel delivery system correctly.

If you’re using a stock tank your going to have to make some changes. We have found a source on New Fuel Tanks Made In Canada for many of our classic Mopars, these are all new material and of a heavy enough gauge to tig weld the sumps into. All emmissions vents are tigged closed...basically converts a stock tank to a big fuel cell.

We have also designed a new Round Aluminum fuel cell that drops into the spare tire well in the trunk, they have a built in slosh baffle, 2 - 5/8" Bungs, -08 vent fitting and a aircraft style filler cap

Watch our web site this week we'll be adding pictures and a complete application listing. This is something we've been working on for a few months, convincing the manufacturer to make the tanks and perfecting the welding and spacers to fill the pleats in the sheet metal.