Rear disc Brakes on 8 3/4
Sorry for the crappy pics. Maybe take the digital camera out of its wrapper tonight.
using a 2000 Ford mustang caliper and rotor.
First my blank sheet of ideas
My working drawing :)
I managed to find a salvaged set of 2000 Ford Mustang rear calipers and rotors for a minimum charge of 20 bucks. Found out that the 5 on 4 1/2 bolt pattern is the same as the ford mustang. However the center hole is smaller on the rotor. So i decided it was better to modify my axles center to accept the rotor.
vs
damn many cunt hairs
I had a spare axle that could not be shortened and re splined so i cut it down and took a bit off the bearing surface so i could quickly assemble the mounts and take it apart to check my work. This setup will work with the stock bearings
Here is a mock up of the brackets.
I just have a bit of fine tuning on the brackets to make it so i can take the brackets off without disassembling the rear axle and also make the brackets look prettier.
Sorry for the crappy pics. Maybe take the digital camera out of its wrapper tonight.
using a 2000 Ford mustang caliper and rotor.
First my blank sheet of ideas
My working drawing :)
I managed to find a salvaged set of 2000 Ford Mustang rear calipers and rotors for a minimum charge of 20 bucks. Found out that the 5 on 4 1/2 bolt pattern is the same as the ford mustang. However the center hole is smaller on the rotor. So i decided it was better to modify my axles center to accept the rotor.
vs
damn many cunt hairs
I had a spare axle that could not be shortened and re splined so i cut it down and took a bit off the bearing surface so i could quickly assemble the mounts and take it apart to check my work. This setup will work with the stock bearings
Here is a mock up of the brackets.
I just have a bit of fine tuning on the brackets to make it so i can take the brackets off without disassembling the rear axle and also make the brackets look prettier.
