it is the chucksclassics setup, with the pull style slave. i bought the kit used from a member on here..
i used dot 3 like the master cylinder says. i checked for binding, but there is none. i took the lower cover off 4- speed, and the t.o.b is in place correctly.. then i took the slave rod off at the clutch fork side, and the slave works fine. the clutch is the 3 finget type where it rides on the t.o.b.
it seems like this clutch needs so much to pull the clutch fork.
cause when i mash the pedal as hard as i can, it works pefectly, just too damn hard