A body Spool Mount K Frame & Disc Brake Suspension

76 360 (Dart) K Frame and complete disc brake front suspension

The K Frame, upper and lower A arms parts have been disassembled and prepared for a quality restoration as follows:

• Cold tanked and pressure washed to completely degrease
• Media blasted with #80 Vitrogrit (recycled glass) to completely clean metal
• Epoxy gray primer
• Eastwood Chassis Black medium gloss

The disc brake shields are in good shape and were also media blasted and painted Eastwood detail gray. Steering linkage and sway bar degreased and pressure washed, natural iron.

I left the K frame welds and a slight bottom scrape as-is. It is a very sound and straight V-8 K Frame, but if you want to weld it up and dress everything smooth with a flap disc this would be an excellent piece to start with too.

I also have all the parts I consider cores to go with this and it is up to the buyer how much of it you want depending on shipping. I will suitably pack and ship any or all of the following as the buyer wishes:

• Disc brake rotors
• Calipers
• Power steering box and pitman arm
• Torsion bars
• Strut rods
• Bolts brackets and hardware

All you need to have a ready to run front end is a bushing and ball joint kit from PST, Just Suspension, Mancini, etc!!

$450 + shipping
inquire PM or [email protected]