318 rebuild

One thing I'd suggest is a different set of pistons. Something a bit more than just a stock replacement. A few years ago I built a 318 for a customer. The biggest thing on their mind was taking these 340 J heads they had and putting them on this 318...thing was the chamber size on the J heads was around 75cc. Big compression drop on this 318. The stock pistons were .110 down the hole if memory serves me correctly compression was on its way down to almost 7:1.

Instead of ruining a perfectly good set of heads I found a set of hypertrutectics from Hughes Engines...http://www.hughesengines.com/Index/products.php
I think it was those.

Duster, nice cams for 318.