Looking for frame connectors

-
memike

memike

Super Moderator
Staff member
FABO Gold Member
Joined
Jan 8, 2006
Messages
55,706
Reaction score
28,988
Location
on the hill
I found this video and was wondering if anyone knows where and who to talk to ta get these, Watch this video and look how nice this man has dun getting our early A bodies frame connected :thumleft:
Or do we have some one here that can send me in the right direction
Thank you all for your time and help.

[ame="http://www.youtube.com/watch?v=ZDfE9P4Cg8A"]YouTube - 66 valiant frame connector 2.wmv[/ame]
 
MeMike,I believe US Cartool carries these that run along the floor pans.I made my own connectors for the 66 Dart.Cost was $24 in steel.Good Luck.
 
Yep UScartool. They use to only make them for the later A's. But from the sound of that vid if the early A ones are not out yet they should be soon.
 
pettybludart said:
MeMike,I believe US Cartool carries these that run along the floor pans.I made my own connectors for the 66 Dart.Cost was $24 in steel.Good Luck.
Click to expand...

Thank you Scott, I will look though your thread and see what you did and show it to my fab man :thumleft:
 
I looked up US Car tool they didn't have any for the 64-67 A bodies. Would the 67 work. Durham is only a couple of hours from me.
 
I called US Car Tool this afternoon and got a part number along with a price. I talked with the owner and one of his ex employee's just bought a Valiant Vert and took it over there so this is a new part for us.

My Cuda will be getting a set.

Phone is 919-855-8200

Part number is USCT-M1106

Price is $179.00
 
old tired rebel said:
I called US Car Tool this afternoon and got a part number along with a price. I talked with the owner and one of his ex employee's just bought a Valiant Vert and took it over there so this is a new part for us.

My Cuda will be getting a set.

Phone is 919-855-8200

Part number is USCT-M1106

Price is $179.00
Click to expand...



Thats way cool:thumleft: Good to see you early A guys are getting some attention.

You should start a new post with this info in it on the early A board so people will see it.
 
From watching that video, they do not fit real well for $179, You can make your own (like I did, and Pettyblue did) for around $30 worth of steel.
 
Burntorange70 said:
Thats way cool:thumleft: Good to see you early A guys are getting some attention.

You should start a new post with this info in it on the early A board so people will see it.
Click to expand...

I did call them and I got the answering machine and gave them my # and told them I seen it here at FABO :toothy2:

I will be going pettybludart way :thumleft:
 
I just saw pictures of a fabo members installation of these US Tool connectors on line yesterday. Looks very nice as they are CNC cut to match the floor plan profile and are designed to me welded in along their full length. Should be stiff as hell. The install is on a '69 Valiant post car. They are now making them for early As. This is the thread

http://www.forabodiesonly.com/mopar/showthread.php?t=116288

It's called 3 Generation Project

Stan Laker
 
Senior Chief said:
I just saw pictures of a fabo members installation of these US Tool connectors on line yesterday. Looks very nice as they are CNC cut to match the floor plan profile and are designed to me welded in along their full length. Should be stiff as hell. The install is on a '69 Valiant post car. They are now making them for early As. This is the thread

http://www.forabodiesonly.com/mopar/showthread.php?t=116288

It's called 3 Generation Project

Stan Laker
Click to expand...


Senior Cheif read post #8 I called them and posted the price and part number. It looks to be a quality pieces and worth the money to install them.
 
You must log in or register to reply here.
-

Back
Top