Tunnel ram 440
no no mine is still in the builder phase but im running this cam
http://www.lunatipower.com/Product.aspx?id=2560&gid=317 The .484 seems to be a popular cam but I want a more
If that the .484 MP PS then yes its popular, but it needs at least 9.1 to run good, they have alot of dur. at 50, plus there ground on a 108, The MP cams are bad about being way off & needing degreed. in, To tell you the truth, I ran the .484 with around 10.1 compression, it ran decent, but all i did was drop in a .509 with no other changes & picked up .5 & 5 mph & the tranny wouldn't shift into 3rd. untill i let off, was on its last legs i guess, the .509 had alot more mid-top end pull over the .484, even down low it ran better.
But for his low compression & running a TR, i think he will be better off with a milder cam that supplys decent vacuum & good torque down low, nice & streetable, slight sound at idle, but will still pull good up to 55-5600.
Down the road if he decides on changing pistons, then he can drop in a more aggressive cam, adj. rockers, more stall & decent aluminum heads or do a nice bowl blend on the irons with a 30* backcut on the valves.
