Mancini Racing still selling Yukon axles that are 3/8"-1/2" too long

I had the same problem you need to call mancini and tell them what center section you have and if it is a clutch/cone or one wheel peal and take the thrust button out you have to take the center section out but you don't have to take it all apart all there is holding it in there is a roll pin.mancini hooked me right up. If you have the old center section with a clutch style You need a 28 1/4" axle if there 28" you will clean a 1/4" of the splines off the first time you do a brake stand