door glass help!!

ok-- you still have your vent frame in(at least partly)-- the front channel(vent frame part) needs to come out, your window fuzzys need to come out, the front channel will have to be pried loose-- it has felt glides that hold the glass in place & allow it to slide up/down.
taking the fuzzies out will give more clearance for removal.
look at my picture, that is how your items should come out, it sounds like you have taken apart the vent window framework & left the back side of it attached to the door glass.(which is the front channel section)
Once that piece is seperated-- the glass will come out fairly quickly you just have to angle it to the back of the door (bigger opening) the plastic rear guide will come out that hole.
your almost there, Lawrence

wow George-- timing, good point-- the front channel piece has a bolt from the bottom of the door it runs through the loops in the front channel bottom pictured, also the vent frame has a mount point right in the middle bottom of the glass portion assembly, there is a small hole in your outer door frame that you run your allen tool or phillips screw driver to loosen that up.